Grey Honda S2000 with modern black luggage rack attached in the sunshine

Honda S2000 Luggage Rack

Welcome, if you are looking for a Honda S2000 luggage rack your in the right place. We import racks from Italy and also manufacture our own unique rack, the Revo-Rack.

We have been manufacturing and retailing luggage racks since 2008. We are the UK & EU specialists with solutions for over 150 convertibles, it's all we do. Please see out Trustpilot feedback. We ship globally from warehouses in the UK & Netherlands.

We have three solutions for the Honda S2000:

  1. The innovative boot-bag luggage bag system, extra space without a rack hand made by us since 2008
  2. Revo-Rack the worlds only clamp less rack, it attaches using vacuum cup technology no metal clamps that damage paint, suitable for all generations.
  3. The Italian made Spring model range in black or stainless.

The Spring Range of Luggage Racks for Honda S2000

The Spring model comes in two finishes Stainless Steel and Black.

Matt Black Model £194.95 / 199.95€ / $224.95

Stainless Steel Model £239.95 / 239.95€ / $264.95

The rack is 108x42cm in size and can fit any boot-lid between 100cm/39" & 135cm/53" in width. What's most impressive about this rack is the quality of the finish and the simple but very effective design the rack uses to attach to the boot lid. The rack has four feet that can swivel and simply clamp onto the edge of your boot-lid. The fixing points the feet attach too simply slide along the rails and like the fit are held in place with a bolt. The luggage racks feet are rubber coated to reduce the risk of any damage to your Honda's boot lid. These luggage racks are designed to carry a load of 20-25kg.

red honda s2000 next a hedge with a black luggage rack fitted
The spring black luggage rack
rear view of a red honda s2000 with a black luggage rack fitted
The spring range can carry 25kg.
red honda s2000 hood down with a stainless steel luggage rack fitted
Spring stainless steel
Rubber coated feet and clamps protect paintwork
close up of a joint on the 1 series bmw cabrio luggage rack
Hight quality manufacture

 

Purchase the spring luggage rack for Honda S2000 here :-


Revo-Rack Luggage Rack for Honda S2000

Black Model £329.95 / 349.95€ / $379
Polished Anodised Model £389.95 / 419.95€ / $449

The Revo-Rack has been manufactured by us in the UK since 2016 it is made from 25mm T5 Aluminium & Magnesium tube and thus the frame only weighs 1.7kg. The design of this rack allows it to fit in under 90 seconds, no bolts, no brackets, no straps, no hassle & no paint damage : ever. We manufacture the rack in either a polished anodised finish which is similar to chrome, or a version that's powder coated black.

Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests : It won't fly off !

The Revo-Rack uses vacuum cup technology it sits on three 115mm vacuum cups these are rated as being able to hold an 18kg load each. These can in theory hold a 54kg load. Vacuum cups are not the same as suction cups they are much much stronger and were developed in the late 1960's to hold film camera's to cars.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force.

Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching boot/trunk lid thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

  • Rack Frame Measures 900x 420mm
  • Sits 75mm off the boot lid
  • No fiddly metal brackets to tighten
  • No metal clamps that will at some point damage paintwork
  • No 3M paint protection stickers ( great on the first use but after that ? )
  • The easiest luggage rack in the world to install.
  • Can be fitted with the hoop at rear or front of boot lid
  • Can carry 20kg
  • Fitted and removed in seconds without tools
  • TUV tested

 

dark blue honda s2000 with the hood up and a revo-rack pa luggage rack fitted to the boot
Revo-Rack PA is hand polished for a deep shine
graphite honda s2000 with a revo-rack black luggage rack fitted photographed from the side.
No metal clamps that chip and mark paint.
rear view of a graphite honda s2000 with the hood up and a revo-rack luggage rack fitted to the boot
Fitted in 90 seconds without tools.
rear view of a dark blue honda s2000 in a field with a stainless steel luggage rack fitted
Certified to carry 20kg.
Revo-Rack being TUV certified, here being subjected to a lifting force of 650 newtons, a test it passed !

 

Soft rubber cannot mark or chip paint

 

 

 

 

Purchase the  Revo-Rack for Honda S2000 here :-


Honda S2000 Luggage Rack Evolved : Boot-bag

The innovative boot-bag also fits the Honda S2000. Boot-bag has been manufactured in the UK by the boot-bag group since 2008 with over 15,000 sold worldwide. The straps simply loop around your Honda's boot lid negating the need for a rack. If you buy a car luggage rack you still need to purchase a waterproof luggage bag. Boot-bag does both jobs for half the cost of a rack alone.

Why a boot-bag instead of a luggage rack ?

  • Fully Waterproof & Hand Made In The UK
  • Attaches using soft webbing so no damage to paint
  • Sits on a soft fabric non slip mat
  • 14 day no quibble money back guarantee.
  • Folds flat for easy storage, can be removed in minutes and stored inside if you stop.
  • Saves Money ; half the price of a rack and waterproof holdall/suitcase

There are two sizes in the boot-bag range :

original  - £124.95 / 144.95€ /$161.95  - 50 Litres of additional luggage capacity  measures 70x36x20cm ( 28"x15"x8") giving 50 litres (1.75 cubic feet) of additional storage. The soft non slip mat the bag sits on is slightly bigger measuring 80x40cm.

vacation - £154.95 / 174.95€ / $194.95 - 75 Litres of additional luggage capacity, 50% larger than the boot-bag original measuring 90x40x20cm.(36"x16"x8")  The soft mat measures 90x45cm.

red honda s2000 hood down with a boot-bag original luggage rack fitted
boot-bag original adds 50 litres of extra luggage space
silver honda s2000 with a boot-bag vacation luggage rack fitted in a car showroom hood down.
Boot-bag vacation adds a huge 75 litres of extra luggage space.

 

How boot-bags work :

boot-bag luggage rack fitting stage 1
Stage one lay out the three straps in an H shape

 

boot-bag luggage rack fitting stage 2
Stage 2 place the soft anti slip fabric matting onto clean paintwork
stage 3 of fitting a boot-bag luggage rack
Attach the 6 ends of the straps to the bag and pull tight, they just loop around the boot lid.

Purchase the boot-bag for Honda S2000 here :-

12 years of evolution boot-bag the details - little things are important.

All boot-bags are hand made by us in the UK
close up of a boot-bag luggage rack
boot-bags have a velcro flap over the zip to prevent water entering the bag through the zip
aerial view of a boot-bag original luggage rack
Boot-bags have a fully adjustable strap system, all points join onto circles that are welded onto the bag, no sewing as this creates holes for water ingress.
view of a boot-bag luggage rack base
boot-bags have a soft base no hooks or studs to mark paint
close up detail of the straps on a boot-bag luggage rack
The straps attach using ladder-lock fixings once pulled tight, they stay tight.
boot-bag luggage rack third brake light
We make an optional third brake light if the bag obscures it
boot-bag vacation and original luggage racks side by side
boot-bag original 50 litre bag and the larger vacation 75 litre model.
All boot-bags are supplied with this soft fabric anti slip matting to protect paint.