Mazda MX5 MK1 Luggage Rack (1989-97)

Mazda MX5 MK1 with modern chrome luggage rack attached

Welcome to Carluggagerack, luggage racks are all we ‘do’ and have done since 2008. If you are looking for a Mazda MX5 MK1 luggage rack, you are in the right place. We are a family run business based near Silverstone UK, we also have an office & warehouse in Rotterdam Netherlands to serve our EU customers customs and tariff free.

We have four solutions for the Mazda MX5 MK1:

  1. The innovative boot-bag luggage bag system, extra space without a rack hand made by us since 2008
  2. Revo-Rack the worlds only clamp less rack, it attaches using vacuum cup technology no metal clamps that damage paint, suitable for all generations.
  3. The Italian made Spring model range in black or stainless.
  4. UK made classic luggage racks suitable for the MK1/MK2 NA/NB  models only

The Spring Range of Mazda Mx5 Luggage Rack for MK1

The Spring model comes in two finishes Stainless Steel and Black.

Matt Black Model £194.95 / 199.95€ / $224.95

Stainless Steel Model £239.95 / 239.95€ / $264.95

The rack is 108x42cm in size and will fit the MK1 perfectly. What’s most impressive about this rack is the quality of the finish and the simple but very effective design the rack uses to attach to the boot lid. The rack has four feet that can swivel and simply clamp onto the edge of your boot-lid. The fixing points the feet attach too simply slide along the rails and like the fit are held in place with a bolt. The luggage racks feet are rubber coated to reduce the risk of any damage to your MX5's boot lid. These luggage racks are designed to carry a load of 20-25kg.

red mazda mx5 mk2 with a rear spoiler and a luggage rack fitted
The spring range can also be used on MX5's with spoilers it only needs 25cm of boot edges to attach.
The waterproof boot-bags we manufacture can also be used on the spring racks
Thick rubber feet protect paintwork ( On MK2 but fits MK1 )
These racks can be fitted either way around

 

The spring stainless steel follows the same design but with 19mm stainless tube
Easy to fit just tighten 4 x10mm bolts.
Our customers use these racks to carry a wide variety of things !
Enjoyed by customers since 2008

 

 

Rubber coated feet protect boot lid sides
Quality design and manufacture

 

Purchase the spring luggage rack for NA/MK1 MX5 here :-

Revo-Rack for Mazda MX5 MK1

Black Model £329.95 / 349.95€ / $379
Polished Anodised Model £389.95 / 419.95€ / $449

The innovative Revo-Rack has been manufactured by us since 2016 it is made from 25mm T5 Aluminium & Magnesium tube and thus the frame only weighs 1.7kg. The design of this rack allows it to fit in under 90 seconds, no bolts, no brackets, no straps, no hassle & no paint damage : ever. We manufacture the rack in either a polished anodised finish which is similar to chrome, or a version that's powder coated black. With all the effort Mazda puts into making the Mx5 light a heavy stainless rack seem to be missing the point.

Revo-Rack has been independently tested by TUV Italy part of the global TUV testing and certification business. The rack went through speed, braking and force tests, to ISO 11154:2006 the international standard for car roof bars and the European Directive for general safety 2002/95/CE. Revo-Rack passed all these tests : It won't fly off !

The Revo-Rack uses vacuum cup technology it sits on three 115mm vacuum cups these are rated as being able to hold an 18kg load each. These can in theory hold a 54kg load. Vacuum cups are not the same as suction cups they are much much stronger and were developed in the late 1960's to hold film camera's to cars.

Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force.

Unlike suction cups that produce a vacuum as they pull away from the surface, Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching boot/trunk lid thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot/trunk lid, distortion is reduced, allowing the cup to be used with very little risk of damage.

  • Rack Frame Measures 900x 420mm
  • Sits 75mm off the boot lid
  • No fiddly metal brackets to tighten
  • No metal clamps or straps that will at some point damage paintwork
  • No 3M paint protection stickers ( great on the first use but after that ? )
  • The easiest luggage rack in the world to install.
  • Can be fitted with the hoop at rear or front of boot lid
  • Can carry 20kg
  • Fitted and removed in seconds without tools
  • Independently tested to ISO 11154 PAS 2006 - Road vehicles roof carriers.
Revo-Rack fits the MK1 perfectly
Revo-Rack black
All Revo-Racks have been independently certified to carry 20kg
Revo-Rack being TUV certified, here being subjected to a lifting force of 650 newtons, a test it passed !
Fitted in 90 seconds no metal brackets to chip paint.
Soft rubber cannot mark or chip paint

 

 

 

 

 

 

 

 

 

Purchase the Revo-Rack luggage rack for NA/MK1 MX5 here :-

The Luggage Rack Evolved : Boot-bag

The innovative boot-bag also fits all MX5 models, its a great alternative to the traditional Mazda Mx5 luggage rack. Boot-bag has been manufactured in the UK by the boot-bag group since 2008 with over 15,000 sold worldwide. The straps simply loop around your MX'5's boot lid negating the need for a rack. If you buy a car luggage rack you still need to purchase a waterproof luggage bag. Boot-bag does both jobs for half the cost of a rack alone.

Why a boot-bag instead of a traditional luggage rack ?

  • Fully Waterproof & Hand Made In The UK
  • Attaches using soft webbing so no damage to paint
  • Sits on a soft fabric non slip mat
  • 14 day no quibble money back guarantee.
  • Folds flat for easy storage, can be removed in minutes and stored inside if you stop.
  • Saves Money ; half the price of a rack and waterproof holdall/suitcase

There are two sizes in the boot-bag range :

original  - £124.95 / 144.95€ / $161.95  - 50 Litres of additional luggage capacity  measures 70x36x20cm ( 28"x15"x8") giving 50 litres (1.75 cubic feet) of additional storage. The soft non slip mat the bag sits on is slightly bigger measuring 80x40cm.

vacation - £154.95  / 174.95€ / $194.95 - 75 Litres of additional luggage capacity, 50% larger than the boot-bag original measuring 90x40x20cm.(36"x16"x8")  The soft mat measures 90x45cm.

Boot-bag original adds 50 litres of extra luggage space to your MX5
All boot-bags are supplied with soft anti slip fabric matting to protect paint
Boot-bags were conceived for the original Mk1 MX5 in 2007
The boot-bag Vacation is a big bag adding 75 litres of extra space
All boot-bags are 20cm high
Boot-bags straps don't move once they are pulled tight and rub boot edges over 12 years of sales demonstrate this.

 

 

 

 

 

How boot-bags work :

Stage one lay out the three straps in an H shape

 

Stage 2 place the soft anti slip fabric matting onto clean paintwork
Attach the 6 ends of the straps to the bag and pull tight, they just loop around the boot lid.

Purchase the boot-bag for NA/MK1 MX5 here :-

12 years of evolution boot-bag the details - little things are important.

All boot-bags are hand made by us in the UK
boot-bags have a velcro flap over the zip to prevent water entering the bag through the zip
Boot-bags have a fully adjustable strap system, all points join onto circles that are welded onto the bag, no sewing as this creates holes for water ingress.
boot-bags have a soft base no hooks or studs to mark paint
The straps attach using ladder-lock fixings once pulled tight, they stay tight.
We make an optional third brake light if the bag obscures it
boot-bag original 50 litre bag and the larger vacation 75 litre model.
All boot-bags are supplied with this soft fabric anti slip matting to protect paint.

The Classic Rack Luggage Rack Range for Mazda MX5 MK1 & MK2

The classic range comes in two models with aluminium cross rails or wood :

Classic chrome wood £149.95 / 184.95€ / $199.95

Classic chrome £134.95 / 169.95€ / $184.95

Both racks measure 89cm x 46cm x 11cm, and can be fitted temporarily using the fitting kit supplied alternatively they can be permanently attached as all four legs and threads within.

The classic wood for MK1 & MK2 MX5
The classic chrome luggage rack
The classic range only fits the MK1 & Mk2 MX5
The rack attaches using a simple thread based clamp on either side. Two are supplied with the rack

Exit mobile version